项目移交流程翻译-中英对照
5.2.6 Hand over
Get handing over diagram by selecting the file HAND_OVERcsv (annonce the handing over message of RBC and PI)
The space path unit in the abscissa axis is meter, in the vertical axis, show the distance of handed over informaton with black on the left of the diagram.
In the diagram, there is a vertical bar corresponding with handed-over PI.
Connect all the point with straight line.
As showed in Fig 50, with the diagram V_TRAIN
Fig 50. PIHO The diagram of annoncing the handing over information, with the vertical bar and part of V_TRAIN diagram
5.2.6移交
通过选中文件HAND_OVERcsv（宣布RBC和PI移交的消息），获得移交图表
在横轴上空间路径单位是米，在纵轴上，在图表左边用黑色表示移交消息揭示的距离
在图表中，还有与移交PI相对应的一条竖线
所有的点用直线连接
图五十示例，连同图表V_TRAIN
图五十 PI HO移交宣布消息图表，连同竖线和部分V_TRAIN图表
5.2.7 Gradient
Get gradient profile diagram by selecting the file GRADIENT.csv (from the gradient profile of RBC message)
The space path unit in the abscissa axis is meter, in the vertical axis, showed in springgreen if rise or descend compared with zero, the unit is meter ( According to a beaten path, it equals to the starting value of the first profile in the first MA)
Connect all the point with straight line, it indeicates the time duration of the application.
As showed in Fig 51, with the diagram of V_TRAIN
Fig 51 Digram of gradient profile and part of V_TRAIN digram
5.2.7梯度
通过选中文件GRADIENT.csv（来自RBC消息的梯度剖面），获得梯度剖面图表
在横轴上空间路径单位是米，在纵轴上，与零相比上升或下降用亮绿色表示，单位是米（按照已经形成的惯例，等于在第一个MA中的第一个剖面的出发值）
所有的点用直线连接，它指示出应用持续的时间
图五十一示例，连同图表V_TRAIN
图五十一梯度剖面图表和部分V_TRAIN图表
5.2.8 Trace status
Get trace status diagram by selecting the file TRACK_CONDITION.csv (the extractable information from RBC message).
The space path unit in the abscissa axis is meter, in the vertical axis, show the trace status by sky blue on the right of the diagram, discribe the value with consistent height, which is equivalent to 2,3,9 units, the same as the of code of trace status.
Connect all the points with staight line, it indicates the lasting of the trace status
As showed in Fig 52, with the diagram of V_TRAIN
Fig 52 diagram of RACK_CONDITION and part of V_TRAIN diagram
5.2.8跟踪状态
通过选中文件TRACK_CONDITION.csv（来自RBC消息的可提取信息），获得跟踪状态图表
在横轴上空间路径单位是米，在纵轴上，在图表右边用天蓝色表示跟踪状态，而值用一贯的高度描述，相当于2，3,9个单位，等于跟踪状态的代码
所有的点用直线连接，它指示跟踪状态的持续
图五十二示例，连同图表V_TRAIN
图五十二 TRACK_CONDITION图表和部分V_TRAIN图表
5.2.9 Limited topspeed profile
Get limited topspeed profile by selecting file V_MRSP.csv ( the variable V_MRSP from JRU message),
The space path unit in the abscissa axis is meter, in the vertical axis, the curve is composed by the points which is equivalent to the V_MRSP value of JRU message, it could be seen and it is showed in green.
Connect all the points with straight line.
As showed in Fig 53, with the diagram of V_TRAIN
Fig 53 Digram of V_MRSP and part of V_TRAIN diagram
5.2.9 限制极速剖面
通过选中文件V_MRSP.csv（来自JRU消息的变量V_MRSP），获得限制极速剖面图表
在横轴上空间路径单位是米，在纵轴上，可以看到与JRU消息的V_MRSP值相对应的点组成的曲线，用绿色表示
所有的点用直线连接
图五十三示例，连同图表V_TRAIN
图五十三 V_MRSP图表和部分V_TRAIN图表
5.2.10 The position of the train
Get the diagram of the train position through selecting file TRAIN_POSITION.csv ( give the position of marked train temporarily)
The space path unit in the abscissa axis is meter, in the vertical axis, the tempory reference of form HH:MM:SS could be seen in the left area, showed in dark color; the curve describle the train’s relative position to the temporary mark
Connect all the points with straight line
As showed in Fig 54, with the diagram of V_TRAIN
Fig 54 TRAIN_POSITION diagram and part of V_TRAIN diagram
5.2.10 列车位置
通过选中文件TRAIN_POSITION.csv（临时给出记号的列车位置），获得列车位置图表
在横轴上空间路径单位是米，在纵轴上，在左边区域可以看到HH:MM:SS形式的临时参照，用深灰色表示；曲线描述了列车相对于临时记号的位置。
所有的点用直线连接
图五十四示例，连同图表V_TRAIN
图五十四 TRAIN_POSITION图表和部分V_TRAIN图表
5.2.11 Release rate
Get the release rate diagram by selecting the file of V_RELEASE.csv (the variable V_RELEASE from JRU message)
The space path unit in the abscissa axis is meter, in the vertical axis, it is release rate; the curve is brown
Connect all the points with straight line
As showed in Fig 55, with the V_TRAIN diagram
Fig 55 Release rate diagram and V_TRAIN diagram
5.2.11 释放速度
通过选中文件V_RELEASE.csv（来自JRU消息的变量V_RELEASE），获得释放速度图表
在横轴上空间路径单位是米，在纵轴上是释放速度；曲线为棕色
所有的点用直线连接
图五十五示例，连同图表V_TRAIN
图五十五 V_RELEASE图表和V_TRAIN图表
5.2.12 Allowable speed
Get allowable speed diagram by selecting the file of V_LOA.csv (from the variable V_LOA of the JRU message)
The space path unit in the abscissa axis is meter, in the vertical axis, it is allowable speed; the curve is in dark colour.
Connect all the points with straight line.
As showed Fig 56, with the diagram of V_TRAIN
Fig 56 V_LOA diagram and part of V_TRAIN diagram
5.2.12 允许速度
通过选中文件V_LOA.csv（来自JRU消息的变量V_LOA），获得允许速度
图表
在横轴上空间路径单位是米，在纵轴上是允许速度；曲线为深色。所有的点用直线连接
图五十六示例，连同图表V_TRAIN
图五十六 V_LOA.图表和部分V_TRAIN图表
2013.3.27