屋顶材料内墙要求翻译-中英对照
4.4.3.23 金属壁板、屋顶与内墙
4.4.3.23.1 装修范围
这里明确了对于金属壁板、屋顶材料和内墙的要求，以及对于投标人进行构思、细节设计、制作、布置、安装、检查以及测试的各项工作的要求，投标人的工作应当与本规范中的要求以及其自身展示的图片相一致。
施工作业包括：
金属壁板和屋顶的设计、制作、布置、安装工作，以及壁板、内墙和屋顶的焊接工作。
内部金属墙包括：
天窗、遮阳棚以及其他附属物。
所有雨水排水沟、遮雨板、扣件以及其他任何必要的防水器具的设计、制作、排布以及安装。
按照要求排布、区隔壁板、屋顶以及墙壁。
表面的油漆和维护。
4.4.3.23.2 法规和标准
遵从以下单位发布的已经实施的法规和标准要求：
AISI 美国铁金属研究所
ANSI 美国国家标准化组织
ASTM 美国材料试验协会
NBS 国家标准局（美）
UL 保险商试验所（美）
尤其应当遵守以下法规和标准的条款：
ASTM A525 热浸镀锌薄钢板的一般标准
ASTM B117 盐雾试验标准
ASTM C423 吸声系数标准试验
ASTM D3363 涂膜硬度试验标准
ASTM D2247 耐水性试验标准
ASTM 623 人工老化试验标准
ASTM D1737 可延展性试验标准
ASTM D523 镜面光洁度试验标准
ANSI A58.1 荷载标准
4.4.3.23.3 质量保证与质量控制
投标人应当完全遵照工程质量保证规定或质量控制要求。质量保证或质量控制所需的材料与提交程序应当符合本规范中“提交”部分的要求。
4.4.3.23.4 提交
签订合同后，投标人应当全面、完整地提供其竞标系统中的各个组件和附属物的材料说明数据给业主审核。
测试数据和报告以及质量控制手续和相关文件应当提交给业主复核。
壁板和屋顶的涂层应当至少能持续10年，投标人应当对此在工程验收后向业主提供书面保证。
工程计算应当证明设计符合该规范要求。
4.4.3.23.4 定义
金属壁板：围住建筑的一面或者多个面的隔热或者不隔热的覆盖物。若该壁板隔热，其应当由外金属板、隔热层、次檩条以及内金属板（其也是壁板的组成部分）组成。如果壁板不是隔热的，那么就仅是外金属板而已。这两种壁板都应当包含相关的扣件和其他相关组件。
金属屋顶：建筑物屋顶的覆盖物，可以隔热也可以不隔热，并有与金属壁板相同的扣件等其他相关组件（这与一般的用混凝土覆盖的金属铺板和/或组合屋顶不同）。
如果屋顶是隔热的，其组件应当包括外金属板、隔热层和内金属板。如果屋顶不是隔热的，则仅由外金属板组成。
金属内墙：建筑物内部一面或者多面上的覆盖物，可以隔热也可以不隔热，有与金属壁板相同的扣件等其他相关组件（这与一般的预置金属盖板或其他类似结构不同）。如果内墙是隔热的，则其应当包含两层金属板和一层隔热的芯层，根据构筑方式的不同，可能有次檩条也可能没有次檩条。如果内墙是不隔热的，则其只由单层的金属板装配而成。
槽型防火金属壁板：由多片用隔热衬板、次檩条、石膏板和槽型延展金属板组合的槽板组装而成，用于业主指定需要有防火外层的地方。
4.4.3.23.1 SCOPE
This specification covers the requirements for metal siding, roofing and interior wall and shall include Bidder's designing, detailing, fabricating, furnishing, installing, inspecting and testing of the work and shall conform to the requirements of this specification and as shown on the drawing.
WORK INCLUDED
Designing detailing, fabricating, furnishing and installing metal siding and roofing, with ail penetration through the siding, walls and roofing.
Interior metal wall works.
Louvers, sunshades, and other appurtenances.
Detailing, fabricating, furnishing and installing all Rain Water Gutters, Flashing, fasteners and other material necessary to ensure a watertight construction.
Furnishing and insulation for siding and roofing and wall as required. Surface protection and painting.
4.4.3.23.2 CODES AND STANDARDS
Comply with the requirements of the applicable codes and standards published by the following organisations:
AISI American Iron Metal Institute
ANSI American National Standards Institute
ASTM American Society for Testing and Materials
NBS National Bureau of Standards, USA
SAE Society of Automotive Engineers,
UL Underwriters' Laboratories, Inc,
Conform especially to the applicable provisions of the following codes and standards
ASTM A525 Galvanized Metal
ASTMB1 17 Salt Spray
ASTM C423 Noise Reduction Coef
ASTM D3363 Pencil Hardness
ASTM D2247 Humidity
ASTM 623 Wentherometer
ASTM D1737 Flexibility
ASTM D523 Gloss
ANSI A58.1 Design Load
0310285
Revision 0 Part 4.4-258 PLTU Adipala (PLTU 2 Jawa Tengah)
1 x (600-700 MW) Location Cilacap
BOOK III
PART 4.4 Civil Works 4.4.3 Technical Specification
4.4.3.23.3 QUALITY ASSURANCE/QUALITY CONTROL (QA/QC)
Bidder shall fully comply with the Project Quality Assurance/Quality Control Requirements. For submitting Quality Assurance/Quality Control Procedures and Documentation the provision of "Submittals" of this specification shall be applied.
4.4.3.23.4 SUBMITTALS
After the contract signed, the Bidder shall furnish complete and comprehensive data on materials specification regarding a component and accessories of his propose system for the Owner's approval.
Test data and report and the quality control procedures and documentation shallbe submitted to the Owner for review.
Written Warranty on siding & roofing coating for a minimum period of 10 (ten) years shall be submitted to the Owner's after acceptance of works.
Engineering calculation shall support the design in conformance with this specification.
4.4.3.23.5 DEFINITIONS
Metal Siding: Exterior enclosure of one or more sides of a structure, insulated or uninsulated. If the siding is insulated, it shall consist of exterior metal sheets, insulation, subgirts and interior Metal sheets (which are the siding components). If the siding is uninsulated, it shall consist of the single exterior metal sheets only. Both types of the siding shall also include all related fasteners and other accessories.
Metal Roofing. Exterior enclosure of the roof of a structure, insulated or uninsulated, constructed of the same components, fasteners and other accessories as for Metal siding (in contrast to metal decking covered with concrete and/or built-up roofing).
If the roofs are insulated, the components shall consist of exterior metal sheets with insulation underneath, and with interior Metal sheets. If roofs are uninsulated, components shall consist of the single exterior rnetai sheets only.
Metal Interior Wall: Enclosure of one or more sides of a space within a structure, insulated or uninsulated, constructed of the same components, fasteners and other accessories for metal siding (in contrast to prefabricated metal partitions or similar constructions). If walls are insulated, components shall consist of two metal sheets enclosing an insulation core, and with or without subgirts depending on the method of construction. If walls are uninsulated, components shall consist of an assembly of single metal sheets.
0310286
Revision 0 ~~~~ Part 4.4-259 PLTU Adipala (PLTU 2 Jawa Tengah)
1 x (600-700 MW) Location Cilacap
BOOK III
PART 4.4 Civil Works 4.4.3 Technical Specification
Fire Rated Insulated Fluted metal Siding: To be used where indicated and approved by the Owner and shall have its exterior fire rated which shall consist of field assembled panels utilizing a liner panel insulation, subgirts, gypsum board and fluted extension metal sheet.
2013.5.4