Passenger door is single fan pneumatic outer swing door, in the front of the bus.
The use and control of the passenger door outside.
-------Insert the key into the lock hole and rotate clockwise by 90 degrees;
------Turn the handle, rotate clockwise by 90 degrees, open the mechanical lock and pull
out the key;
-------Press the switch of remote key (on stands for open, off for closed), when gas
pressure of the door in the path meets working air pressure（0.6 ~ 0.8Mpa）, the door can
be opened or closed;
-------Press the switch of remote key (on stands for open, off for closed), when gas
pressure of the door in the path cannot meet working air pressure（0.6 ~ 0.8Mpa）, turn the
red button near the passenger door to off, you can open the front door manually;
-------Rotating arm needs adjusting properly after 20000 km, in order to ensure the quality
of the passenger door;
Caption: The first and second steps are not needed, if mechanical lock is unlock.
锁孔:lock hole 外手柄: outer handle
Figure: Passenger door lock
Warning:
Electrical control pneumatic system is not available, after locking the door using
mechanical lock.
The use and control of passenger door inner bus
--------Rotate the inner handle of mechanical lock retrograde by 90 degree to unlock;
--------Press the on-off switch for passenger door on instrument desk, when gas pressure of
the door in the path meets working air pressure（0.6 ~ 0.8Mpa）, the door can be opened or
closed;
--------Press the on-off switch for passenger door on instrument desk, when gas pressure of
the door in the path（< 0.6Mpa）is not satisfied , turn the red hand pulling discharging
switch above the passenger door inner bus to off, you can open the front door manually;
Figure: Handle of mechanical lock inside
Figure: On-off switch for passenger door on instrument desk 关门:close 开门:open
Figure: Hand pulling discharging switch above the passenger door
0. Vehicle identification 1.Operation 2.Driving
3. Maintenance 4. Do-it-yorselfery 5.Safety
6. Technical data 7. Malfunction 8. Auto parts and Engineering change 9.Storage
and Transport
The driver’s window
The driver’s window is push-pull window in structure form.
The use and control of push-pull driver’s window
-------Gently press the nylon lock in the side window to separate the lock hook and slot,
and pull forward or backward to open the side window.
Figure: Lock of push-pull driver’s window
0. Vehicle identification 1.Operation 2.Driving
3. Maintenance 4. Do-it-yourself 5.Safety
6. Technical data 7. Malfunction 8. Auto parts and Engineering change 9.Storage
and Transport
埃塞俄比亚联邦民主共和国 埃历时间：2005年4月22日
贸易部 文件号：030/2/11022/13885
To: C.H. CLINKER MANUFACTURER PLC
ADDIS ABABA
致：CH熟料制造有限公司
亚迪斯亚贝巴
Subject: Confirmation Letter
主题：确认信
As per your request to issue you a letter Confirming C.H CLINKER MANUFACTURER PLC Information on our file, we would like to confirm that:
根据您关于发布CH孰料制造有限公司在我部档案信息确认信的请求，我部现将该企业相关信息确认如下：
The company is registered by Ethiopian Investment Agency registration No. EIA-PC01/2853/09 on December 31st, 2009.
该公司于2009年12月31日从埃塞俄比亚投资管理局进行商业登记，登记号码为EIA-PC01/2853/09。
The Shareholders are:
股东结构为：
|
No. 序号 |
Shareholders’ Name 股东姓名 |
Share Value 股价 |
Share Amount 股份数量 |
Total Amount 总额 |
|
1 |
Guangdong Chuanhui Technology Development Group Ltd 广东川惠科技发展集团有限公司 |
210,000 |
10,000 |
2,100,000,000 |
|
2 |
Ms. Meifang Chen 陈梅芳女士 |
75,000 |
10,000 |
750,000,000 |
|
3 |
Mr. Haichuan Liu 刘海川先生 |
15,000 |
10,000 |
150,000,000 |
|
Total 总计 |
300,000 |
|
3,000,000,000 |
|
The company’s general manager is Mr. Huaichuan Liu.
该公司总经理为刘海川先生。
The company has got a business license from the Ethiopian Investment Agency with No. EIA-OL/3045/2012 on January 10th, 2012.
该公司于2012年01月10日从埃塞俄比亚投资管理局取得营业执照，执照号码为EIA-OL/3045/2012。
We hope this will suffice your inquiry.
希望以上可以满足您的咨询。
Best Regards,
致敬
Nuredin Mahammed Ibnhim贸易登记与执照指导中心总监
(签名章，并签名)
电话号码 传真 地址：亚蒂斯亚贝巴-埃塞俄比亚