冷却水空气冷却系统翻译-中英对照
Drainage and dewatering System for Cooling Water of Air Cooling System and Oil Cooling System of the unit
冷却水的空气冷却系统和油冷却系统装置的排水和疏水系统
Drainage water from air coolers and oil coolers shall be discharged to the downstream of the powerhouse.
空气冷却器的污水和冷却器油排放到发电站的下游。
The drainage system shall consist of the main parts such as pressure drainage pipes, non-return valves, direct valves, testing valves, electro-magnetic flow meters with relay, and all necessary accessories for functional and effective operation of the system.
排泄系统的主要部件由压力排污管，单向阀，直通阀，测试阀，带继电器的磁性电流量计组成，以及所有系统中起作用和进行有效操作的必要附件。
Drainage water from the backwash devices of the main water strainer and from other equipments shall be discharged to the downstream of the powerhouse.
排放的污水通过主过滤器装置的回流过滤器设备以及其它设备排放到发电站的下游。
Materials of the selected piping of drainage and dewatering system shall be similar to the materials used for water supplying system. The open piping shall be designed so as to facilitate disassembling when necessary. The Employer shall approve materials and design standard.
排污管和疏水系统选择的材料必须与供水系统使用的材料相同。管子的开口必须方便拆卸， 材料和设计标准必须获得雇主的同意。
C-E：自主开发的高档数控锥齿轮铣齿机、磨齿机、研齿机、检查机可为用户提供实现高精度锥齿轮数字化、网络化和智能化加工的成套设备。
C-E: Self-developed top-grade numerical control bevel gear milling machine, gear grinding machine, and checking machine may offer user complete sets of equipment so as to realize digitization, networking and intelligent processing of high-accuracy bevel gear.
全自动、闭环控制，可切削展成法、成形法大轮和变性法、刀倾法小轮。可切削加工2000㎜以下所有螺旋锥齿轮，还可根据客户实际需求进行铣齿机配置选型或定制设计。
Full-automatic, close-loop control, machinable generating method, method of large pulley forming the degeneration methods, and knife inclining law steamboat as well; it is applicable to cut and process all spiral bevel gears below 2000mm and also select the model of bevel gear or customize design according to actual requirement of customers.
铣齿加工
Gear milling process
磨齿加工
Gear grinding process
工件加工数据
Work piece processing data
精度控制
Precision control
齿轮设计分析
Gear wheel design and analysis
设计与检验数据对应
Correspondence of design and testing data i
铣齿加工
Gear milling process
磨齿加工
Gear grinding process
工件加工数据
Work piece processing data
对滚检查
Rolling inspection
2012.11.26