微电子技术研究所介绍-中英对照
East China Micro-electronics Technology Research Institute
华东微电子技术研究所是中国从事微电子技术研究的国家一类研究所，主要从事厚膜、薄膜混合集成技术（HIC）、多芯片组件技术以及相关电子材料、电路及专用设备的研究和制造。 East China Micro-electronics Technology Research Institute is China’s national first-class research institute which is mainly engaged in researching and producing of thick-film, thin-film hybrid IC (HIC), multi-chip module technology and related electronic material, circuit and manufacturing equipments. 我所已通过ISO9000质量管理体系认证，拥有国内领先的多芯片组件（MCM）、厚膜混合集成电路、薄膜混合集成电路以及金属封装外壳等四条研制生产线，混合集成电路可满足GJB2438A-2000《混合集成电路通用规范》H级要求（相当于MIL-PRF-38534的H级）。 We have already obtained ISO9000 Quality Management System Certificate, and have four research and product line, including MCM, thick-film hybrid integrated circuits, thin-film hybrid integrated circuits, and metal package, which are of the lead position in domestic level. Hybrid integrated circuits is meeting H-level requirements of GJB2438A–2000. (“General Specification of Hybrid Integrated Circuits”)(Equivalent to H-level of MIL-PRF-38534)
我所研制生产的产品有功率电路（包括DC/DC、AC/DC、DC/AC、EMI滤波器、脉宽调制放大器）、转换器电路（SDC/RDC、DRC/C、F/V、I/F变换器）、精密基准电路（电压基准源、精密恒流源）、信号处理电路、放大器电路、专用混合集成电路、多芯片组件、厚膜工艺设备以及相关电子材料等，广泛应用于工业领域高可靠的电子设备中。
Our products include power circuits (including DC/DC, AC/DC, DC/AC, EMI filters, pulse width modulation amplifier), the converter circuits (SDC/RDC, DRC/ C, F/V, I/F converter), precision benchmark circuits (voltage reference, precision constant current source), signal processing circuit, amplifier circuit, hybrid integrated circuits, MCM, thick-film technological equipment and related electronic equipment, which are widely used in industrial highly reliable electronic devices.
电路类:
Circuit
1.第一代DC/DC变换器（厚膜电路）
DC/DC变换器产品经过二十多年的不断完善,目前已形成系列化、标准化、供货批量化。
产品特点：
1、采用PWM推挽式技术
2、工作频率：200kHz~300kHz(恒频)
3、输入电压：18V~36V
4、输出功率：5W、15W、30W、50W、70W、200W
5、具有禁止、短路保护等辅助功能。
6、工作温度：-55℃~105℃
7、厚膜混合集成工艺，裸芯片组装，全密封金属封装。
1. First-generation DC/DC Converter (thick-film circuit)
After more than 20 years of continuous improvement, DC/DC converter products currently are serialized, standardized and available for mass supply.
Features:
1. Using PWM push-pull technology.
2. Working frequency: 200 kHz~300 kHz (Constant Frequency).
3. Input voltage: 18 V~36V.
4. Output power: 5W, 15W, 30W, 50W, 70W, 200W
5. Auxiliary functions such as prohibit, short-circuit protection.
6. working temperature: -55℃~105℃.
7. thick-film hybrid integration technology, bare chip assembly, whole-sealed metal package.
2.第二代DC/DC变换器
产品特点：
1、采用单端式PWM与谐振磁复位技术
2、工作频率：400kHz~600kHz(恒频)
3、输入电压：16V~40V
4、输出功率：5W、15W、20、30W、50W、65W
5、具有禁止、短路保护、外同步等辅助功能
6、工作温度：-55℃~125℃
7、厚膜混合集成工艺，裸芯片组装，全密封金属封装
8、质量等级为H级
2. Second-generation DC/DC Converter
Features:
1. Using single-ended PWM and magnetic reset technology
2. Working frequency: 400 kHz~600 kHz (Constant Frequency)
3. Input voltage: 16V~40V
4. Output power: 5W, 15W, 20, 30 W, 50W, 65W
5. Auxiliary functions such as prohibit, short-circuit protection, external synchronization
6. working temperature: -55℃~125℃
7. thick-film hybrid integration technology, bare chip assembly, whole-sealed metal package
8. with quality level of Class H
3、EMI电源滤波器
产品特点：
1、输入电压：16V~40V
2、输出电流：最大可达7A
3、产品抗γ总剂量辐射能力达3×105rad(si)
4、电磁兼容特性符合GJB151A-97之CE102要求(相当于MIL-STD-461C之CE03)
5、厚膜混合集成工艺，全密封金属封装结构
6、质量等级为H级
3. EMI Power Filter
Features:
1. Input voltage: 16V~40V
2. Output current: 7A Maximum
3. Total dose of resist γ radiation capacity: 3×105rad (si)
4. Electromagnetic compatibility meeting CE102 of GJB151A-97 requirements (equivalent of CE03 of MIL-STD-461C)
5. thick-film hybrid integration technology, whole-sealed metal package
6. with quality level of Class H
4.软开关大功率DC/DC变换器
1、ZCS/ZVS软开关技术，最大工作频率：1MHz
2、输入电压：18V~36V
3、工作温度：-55℃~105℃
4、输出功率：50W~200W
5、具有同步功能，支持并联扩流。
6、采用模块式
7、兼容vicor同类产品。
4. Soft-switching high-power DC/DC Converter
1. ZCS/ZVS soft-switching technology, the maximum working frequency: 1MHz
2. Input voltage: 18V~36V
3. working temperature: -55℃~105℃
4. Output power: 50W~200W
5. Synchronization function, support paralleling to expand flow.
6. Modular
7. Compatible with vicor and similar products
5.旋转变压器/自整角机-数字转换器
轴角-数字转换器系列产品主要应用于角度、位置的测量和控制。这类产品已研制生产了二十多年，有模块式和混合集成式两种结构类型，已形成比较完善的系列产品，具体有下列两类：
5. Resolver/Synchro-Digital Converter
Resolver-digital converter series products are mainly used in measurement and control of perspective and location. Such products has been researched and produced for more than 20 years, including two types-- modular structure and hybrid integrated structure. We have formed a fairly complete series of products, specifically the following two categories:
A、SDC/RDC自整角机/旋转变压器-数字转换器
产品特点：
1、激磁频率0-2.6 kHz任选
2、分辨率12位、14位、16位
3、精度：±8分、±4分、±2分
4、对非标输入可使用外部电阻衰减
5、具有VeL输出、内部差动隔离输入、三态锁存输出
A. SDC/RDC Synchro / Resolver -Digital Converter
Features:
1. Excited magnetic frequency: 0-2.6 kHz optional
2. Resolution: 12, 14, 16
3. Accuracy: ± 8, ± 4, ± 2
4. Can use external resistor attenuation for non-standard input
5. With VeL output, internal isolated differential input and three-state latch output
B、DSC/DRC系列数字-自整角机/旋转变压器转换器
产品特点：
1、与DTL/TTL/CMOS电平兼容
2、分辨率12位、14位、16位、19位
3、短路和过载保护
4、内部带有功放电路，输出功率达1.5W/5W
B. DSC/DRC Series Digital-Synchro / Resolver Converter
Features:
1. Compatible with DTL/TTL/CMOS level
2. Resolution: 12, 14, 16, 19
3. Short-circuit protection and overload protection
4. With internal power amplifier circuit, output power of 1.5W/5W
6、激励源（DC/AC电源）
产品特点：
1、输入电压：±15V或＋28V
2、输出频率：50Hz-2.6 kHz±2%
3、输出电压2V、6V、11.8V、26V、36V、115V及其它
4、输出波形质量高、失真度小＜3%、5%(115V)
5、输出功率1.8W、5W、10W、20W、50W
6. Excitation Source (DC/AC power)
Features:
1. Input voltage: +28V or ± 15V
2. Output frequency: 50Hz-2.6 kHz ± 2%
3. Output voltage: 2V, 6V, 11.8V, 26V, 36V, 115V, etc.
4. High quality of output wave with small distortion <3%, 5% (115V)
5. Output power: 1.8W, 5W, 10W, 20W, 50W
7. 任意比速双速转换器
产品特点：
1、激磁频率0-2.6kHz
2、最高分辨率20位
3、高精度4秒
4、速比可调(1:8、1:16、1:32、1:64)
5、三态锁存输出
7. Double-speed Converters with arbitrary velocity
Features:
1. Excited magnetic frequency: 0-2.6kHz
2. Highest resolution: 20
3. High precision: 4 seconds
4. Adjustable speed ratio (1:8, 1:16, 1:32, 1:64)
5. three-state latch output
8.电压基准源(薄膜电路)
产品特点:
1、基准电压范围：±2.5V～±10V
2、高稳定性(温度系数最高可达0.5 ppm/℃)
3、高精度（0.2%-0.1%）
4、小体积、低功耗
5、多功能(多路输出、正负对称跟踪输出、可编程)
6、可选择温控技术
7、质量等级为H级
8. Voltage Reference Source (thin-film circuits)
Features:
1. reference voltage range: ± 2.5V～± 10V
2. high stability (temperature coefficient up to 0.5 ppm /℃)
3. High precision (0.2% -0.1%)
4. Small size, low power consumption
5. Multifunctional (multi-output, plus-minus symmetric tracking output, programmable)
6. Optional temperature control technology
7. with quality level of Class H
9.电流基准源(恒流源)
产品特点:
1、基准电流范围：±1～±60mA；
2、启动稳定时间短(1.5min)；
3、高精度（对称性≤±0.1%）；
4、低温漂≤8 ppm/℃；
5、低时漂30 ≤ppm；
6、对称跟踪性(正负路电流对称并跟踪)；
7、可选择温控技术；
8、质量等级为H级。
9. Current Reference Source (Constant current source)
Features:
1. reference current range: ± 1～± 60mA;
2. Short starting time (1.5 min);
3. High precision (symmetry ≤ ± 0.1%);
4. low temperature drift ≤ 8 ppm /℃;
5. Low time drift, ≤ 30ppm;
6. Symmetric tracking (plus-minus current symmetric and tracking);
7. Optional temperature control technology;
8. with quality level of Class H
10、纳秒脉冲发生器(HPG296)
产品特点:
1、通电后产生一定时序的三路脉冲；
2、脉冲前后沿≤4ns；
3、脉冲宽度A路为43~53 ns，B、C路为90~110 ns（g根据需要，可在100 ns以内任意设定）；
4、重复频率由外接晶振确定（≤1MHz）；
5、输出脉冲幅度为TTL电平
6、质量等级为H级。
10. Nanosecond Pulse Generator (HPG296)
Features:
1. Crating three-way pulse with a certain timing after electrified
2. leading-legging edge of the pulse ≤ 4 ns;
3. Pulse width: A channel 43 ~ 53 ns, B, C channel 90 ~ 110 ns (can be set within 100ns as needed);
4. Repetition frequency determined by external crystal oscillator (≤ 1 MHz);
5. Output pulse amplitude is TTL level
6. with quality level of Class H;
11、电荷放大器（HCA2）
产品特点：其原理是将接收的电荷输入信号，转换成电压信号，使加速度计等传感元件产生的电荷转换成电压。该电路采用薄膜混合集成工艺、裸芯片组装。金属全密封圆形外壳封装。技术指标高，体积小，重量轻。工作温度-55℃～125℃，质量等级为H级。
11. Charge amplifier (HCA2)
Features:
Its principle is the amplifier will receive input charge signals, convert them into voltage signals, so as to let sensor components such as accelerometer create charges and convert them into voltage. The circuit makes use of thin-film hybrid integrated technology, bare chip assembly. It is packed with whole-sealed circular metal shell, with high technical specifications, small size and light weight. Working temperature is -55℃～125℃, with quality level of Class H
2012.12.21