应答器操作手册翻译-中英对照
4.4 Definition of message search filter
4.4 消息搜索过滤器的定义
It is possible to select message of this type via search filter. All messages with input type indicated may be selected via “message name” field shown in the figure below.
通过搜索过滤器，有可能选择出此类型的消息。通过下图展示的“消息名称”领域，有可能筛选出所有指出的输入类型的消息。
Figure 24 Select message of this type
图二十四：筛选此类型的消息
Filter in current list is applied in Figure 24 and 25 to select all messages of the type “message from transponder”.
在图二十四和二十五中，应用当前列表上的过滤器：筛选出所有“来自应答器的消息“类型的消息。
Figure 25 Apply Filter to Select All Messages of The Type“Message From Transponder”
图二十五 应用过滤器筛选所有“来自应答器的消息”类型的消息
Reified list is acquired in the example of Figure 26.
在图二十六的例子中，得到具体化的列表。
Figure 26 List from Selecting All Messages of The Type “Message From Transponder” via Filter
图二十六 通过应用过滤器筛选所有“来自应答器的消息”类型的消息所获得的列表
4.5 Application Area of Search Filter
4.5 搜索过滤器的应用领域
Search filter may be applied in
搜索过滤器可以被应用于
Input offered list or current list finally acquire from current application of filter
输入所提供的列表或者从当前过滤器应用中最终获得的当前列表
That is, distinguishing application areas of search filter is to select “only apply filter for reified data” in the figure below.
即区别搜索过滤器应用领域是选择“只对已具体化的数据应用过滤器”，在下图中选出。
Figure 27 Selected Option “Only Apply Filter for Reified Data”
图二十七 被选出的“只对已具体化的数据应用过滤器”选项
If the option is not selected, filter will be applied in input list and list produced from reading input file. This means that, although filter is applied, if the option is not selected, new filter will be applied in original list thus final filtration is not reserved.
如果这个选项没被选中，那么过滤器被应用在输入列表中和由读取输入文件产生的列表中。这意味着，尽管过滤器已经被应用了，但如果此选项没被选中，新的过滤器将被应用到原列表中，没有对最终完成的过滤进行保存。
If the option is selected, filter will be applied in current list. For example, if filter A is applied, we may apply new filter B by selecting option “only apply filter for reified data”. As a result, list will be made up of all messages satisfying both A and B.
如果这个选型被选中，那么过滤器被应用在当前列表上。比如，应用了过滤器A，我们通过选择“只对已具体化的数据应用过滤器”选项应用新的过滤器B， 结果，列表将由即满足A又满足B的所有消息组成。
5. Fabrication and materialization of data in group
5 组群数据的制作和具体化
Data picked up from file downloaded from judicial record unit (JRU) is divided into single path thus divided into congeneric family. Group intent to be analyzed by single path or multiple paths belongs to following list (we mean variable in [R1]).
从司法记录单元（JRU）下载文件提取的数据被分成单个的路径，所以被划分到同类家族中。能够被单独路径或多个路径分析的组群属于以下列表（我们指的是在[R1]中的变量）
Train speed (variable V_TRAIN is leader of all messages in JRU)
列车速度（变量V_TRAIN属于JRU所有消息的统领）
Temporary speed limit (variable V_TSR from RBC message)
临时限速（来自RBC消息的变量V_TSR）
Error (variable M_ERROR from JRU and towards RBC message)
错误（来自JRU和朝着RBC消息的变量M_ERROR）
Mode and level (variable M_MODE and M_LEVEL shown in leader of all messages in JRU)
方式和水平（在JRU所有消息的统领中所展示的变量M_MODE 和M_LEVEL）
Apply brake (variable M_BRAKE_STATE shown in a JRU message)
采用制动（一则JRU消息中显示的M_BRAKE_STATE变量）
Transfer (announce message of transfer between RBC and PI)
移交（宣布RBC和PI移交的消息）
Gradient (gradient profile from RBC message)
梯度（来自RBC消息的梯度剖面）
Trace status (extractive message from RBC message)
跟踪状态（来自RBC消息的可提取信息）
Maximum speed limit profile (variable V_MRSP from JRU message)
限制极速剖面（来自JRU消息的变量V_MRSP）
Location of train (location of train temporarily giving mark)
列车位置（临时给出记号的列车位置）
Release speed (variable V_RELEASE from JRU message)
释放速度（来自JRU消息的变量V_RELEASE）
Allowable speed (variable V_LOA from JRU message)
允许速度（来自JRU消息的变量V_LOA）
5.1 Operating mode for creating data group
5.1 创造数据组群的操作方式
Data in group should come from binary file downloaded from JRU. As shown in Figure 39, binary file is opened by selecting the type “all files (**)”from file list.
组群数据应该产生于司法记录单元（JRU）下载的二进制文件。从文件菜单，通过选择类型“所有文件(*.*)”打开二进制文件，如图三十九所示。
Figure 39 Open Binary File from JRU
图三十九 打开来自JRU的二进制文件
Just as shown, software decodes data extracted from selected file and gives a message in status bar.
正如所示的那样，软件对从已选中文件中提取的数据进行解码，同时在状态栏显示一条消息，如图四十所示。
Figure 40 Decode Data
图四十 解码数据
As shown in figure 41, distance file should be opened in the end of operation.
在操作结束之时，要求打开距离文件，如图四十一所示。
Figure 41 Open Distance File
图四十 打开距离文件
A window may indicate generation of group data file with progress bar able to indicate progress of fabrication. (Figure 41)
一个窗口，带着能够指示制作进程的进度条，指示出组群数据文件的产生。（图四十一）
Figure 41 Generating Data in Group
图四十一 正在产生组群数据
In the end of generation of data in group, “upload data in group” will be selected from file list. It is possible to select path ETCS_ID and data or time for execution (see Figure 42).
在产生组群进程的末尾，从文件菜单中选择“加载组群数据”，有可能选择命令路径ETCS_ID和执行的日期或者时间（请看图四十二）
Figure 42 Select Group Data
图四十二 选择组群数据
In the special example, it is intent to select data of “3194” train on route of 00: 11, Oct 21, 2006.
在此特例中，想要选择与3194次列车在2006年10月21日零点十一分路线的相关数据
2013.3.29