项目移交流程翻译-中英对照
Figure 43 Select Route
图四十三 选择路线
Thus, by clicking icon corresponding to csv file, it is easy to select data to be shown in the next chart. Selected files will be distinguished with red tick, which will all produce different chart in the next screen. (Figure 44)
因此，用鼠标点击.csv文件相关的图标，就可以轻松地选择出在下张图表中显示出哪些数据。选中的文件将用红色的对号区别开来，每一个都将在下个屏幕中产生不同的图表。（图四十四）
Figure 44 Show File with Red Tick in Chart
图四十四 在图表中显示的有红色对号的文件
5.2 Data in group shows in chart
5.2 组群数据在图表中的显示
All visible charts have common points as following:
所有的可视图表都具有以下共同点：
There is always space path of train in selected route on horizontal axis.
在横轴上 在选中的路线上总是有列车的空间路径
There is a group of values and description of selected data from time to time on vertical axis.在纵轴上 时不时地会有一条带有一组值和根据选中数据的相关描述
The chart will provide all data of route. To acquire better and more detail information, it is necessary to use the tool “enlarge”in area of interest.
图表将展示路线的所有数据，为了获得更好、更详尽的信息，应该在感兴趣的区域使用“放大”工具
Area means a region. Here used legend with mark is considered as representative. Arrowhead indicates whether train is on service nominally or not.
区域代表一块地区，在这里用使用过的记号的图例作为代表，箭头指示列车是否在名义上已经旅行或者相反的情况。
How to fabricate generated file into group data will be shown in brief in the next chapter.
在下一章将简短地展示如何将可产生文件制作成组群数据
5.2.1 Train speed
5.2.1 列车速度
Chart of train speed
列车速度图表
The chart is acquired by selecting file V_TRAIN.csv (variable V_TRAIN is leader of all messages in JRU).
通过选中文件V_TRAIN.csv（变量V_TRAIN是JRU所有消息的统领），获得列车速度图表
On horizontal axis, unit of space path is meter. On vertical axis, unit of speed is km/h.
在横轴上空间路径单位是米，在纵轴上速度单位为千米/时
All points are linked with straight line.
所有的点用直线连接
Figure 45 Example
图四十五示例
Figure 45 Chart of Train Speed (V_TRAIN)
图四十五 列车速度图表（V_TRAIN）
5.2.2 Temporary speed limit
5.2.2 临时限速
The chart is acquired by selecting file V_TSR.csv (variable V_TSR from RBC message).
通过选中文件V_TSR.csv（来自RBC消息的变量V_TSR），获得临时限速图表
On horizontal axis, unit of space path is meter. On vertical axis, unit of speed is km/h.
在横轴上空间路径单位是米，在纵轴上速度单位为千米/时
All points are linked with straight line.
所有的点用直线连接
Figure 46 Example
图四十六示例
Figure 46 Chart of Temporary Speed Limit
图四十六 临时限速图表
5.2.3 Error
5.2.3 错误
The chart is acquired by selecting file ERROR.csv (variable M_ERROR from JRU and towards RBC message).
通过选中文件ERROR.csv（来自JRU和朝着RBC消息的变量M_ERROR），获得错误图表
On horizontal axis, unit of space path is meter. On vertical axis, error is represented by blue in right of chart.
在横轴上空间路径单位是米，在纵轴上，在图表的右边用蓝色表示错误
All points are linked with straight line.
所有的点用直线连接
Figure 47 Example Together with Chart V_TRAIN
图四十七示例，连同图表V_TRAIN
Figure 47 M_ERROR Chart and Part of V_TRAIN Chart
图四十七 M_ERROR图表和部分V_TRAIN图表
5.2.4 Mode and level
5.2.4 方式和水平
The chart is acquired by selecting file MODE.csv (variable M_MODE and M_LEVEL shown in leader of all messages in JRU).
通过选中文件MODE.csv（在JRU所有消息的统领中所展示的变量M_MODE 和M_LEVEL），获得方式和水平图表
On horizontal axis, unit of space path is meter. On vertical axis, mode and level are represented by red in right of chart.
在横轴上空间路径单位是米，在纵轴上，在图表右边用红色表示方式和水平
All points are linked with straight line.
所有的点用直线连接
Figure 48 Example Together with Chart V_TRAIN.
图四十八示例，连同图表V_TRAIN
Figure 48 Chart of M_MODE and M_LEVEL and Part of V_TRAIN Chart
图四十八 M_MODE 和M_LEVEL图表和部分V_TRAIN图表
5.2 Apply brake
5.2．采用制动
The chart is acquired by acquired by selecting file EMERGENCY_BRAKE.csv and SERVICE_BRAKE.csv (variable M_BRAKE_STATE shown JRU message).
通过选中文件EMERGENCY_BRAKE.csv和SERVICE_BRAKE.csv（一则JRU消息中显示的M_BRAKE_STATE变量），获得采用制动图表
On horizontal axis, unit of space path is meter. On vertical axis, brake is represented by purple in right of chart.
在横轴上空间路径单位是米，在纵轴上，在图表右边用紫色表示采用制动
All points are linked with straight line. They indicate duration of application.
所有的点用直线连接，它指示出应用持续的时间
Figure 48 Example Together with Chart V_TRAIN.
图四十九示例，连同图表V_TRAIN
Figure 48 MM_BRAKE_STATE Chart and Part of V_TRAIN Chart
图四十九 MM_BRAKE_STATE图表和部分V_TRAIN图表
5.2.6 Hand over
5.2.6移交
Get handing over diagram by selecting the file HAND_OVERcsv (announce the handing over message of RBC and PI)
通过选中文件HAND_OVERcsv（宣布RBC和PI移交的消息），获得移交图表
The space path unit in the abscissa axis is meter, in the vertical axis, show the distance of handed over information with black on the left of the diagram.
在横轴上空间路径单位是米，在纵轴上，在图表左边用黑色表示移交消息揭示的距离
In the diagram, there is a vertical bar corresponding with handed-over PI.
在图表中，还有与移交PI相对应的一条竖线
Connect all the point with straight line.
所有的点用直线连接
As showed in Fig 50, with the diagram V_TRAIN
图五十示例，连同图表V_TRAIN
Fig 50. PIHO The diagram of announcing the handing over information, with the vertical bar and part of V_TRAIN diagram
图五十 PI HO移交宣布消息图表，连同竖线和部分V_TRAIN图表
5.2.7 Gradient
5.2.7梯度
Get gradient profile diagram by selecting the file GRADIENT.csv (from the gradient profile of RBC message)
通过选中文件GRADIENT.csv（来自RBC消息的梯度剖面），获得梯度剖面图表
The space path unit in the abscissa axis is meter, in the vertical axis, showed in spring green if rise or descend compared with zero, the unit is meter ( According to a beaten path, it equals to the starting value of the first profile in the first MA)
在横轴上空间路径单位是米，在纵轴上，与零相比上升或下降用亮绿色表示，单位是米（按照已经形成的惯例，等于在第一个MA中的第一个剖面的出发值）
Connect all the point with straight line; it indicates the time duration of the application.
所有的点用直线连接，它指示出应用持续的时间
As showed in Fig 51, with the diagram of V_TRAIN
图五十一示例，连同图表V_TRAIN
Fig 51 Diagram of gradient profile and part of V_TRAIN diagram
图五十一梯度剖面图表和部分V_TRAIN图表
2013.3.30