金属矿开采可行性研究翻译-中英对照
蒙根-温都尔银多金属矿开采可行性研究
1 总论
1.1 概述
蒙根-温都尔银多金属矿位于蒙古国肯特省（市）南德拉格县蒙根-温都尔地区，矿区中心位置为温都尔查干，如图1-1、表1-1。
图1-1 矿区交通位置图
矿区矿产开采特别许可证（证书编号10278A）于2007年01月29日取得，矿权登记起始日2005年8月11日，有效期30年，登记面积约1.73Km2 。矿区地理坐标为:
东经 北纬
1、110°10′30″ 47°52′00″
2、110°12′00″ 47°52′00″
3、110°12′00″ 47°51′30″
4、110°10′30″ 47°51′30″
表1-1 矿区离各居民点及工业设施的距离
序号 居民点 方向 距离（公里）
1 乌兰巴托市 西 330
2 温都尔汗市 东南 80
3 额木讷德勒格尔县 西 30
4 贝尔赫矿 东北 90
5 巴嘎诺尔煤矿 西 220
6 包尔温都尔采矿选矿联合公司 南 270
1.2 编制依据
(1)设计委托书；
(2)《蒙根—温都尔银多金属矿固体矿产资源储量核查报告》。
(3)《有色金属工业项目可行性研究报告编制原则规定》（试行），（中色协产字[2001]208号）；
(4)《爆破安全规程》（GB6722-2003）；
(5)《金属非金属矿山安全规程》（GB16423-2006）；
(6)《有色金属采矿设计规范》[试行]（YSJ019-92）。
1.3 设计基本原则
1.3.1 设计中所遵循的主要方针、政策和原则
（1）充分考虑矿区所在的自然地理环境和矿体特征，精心规划和优化设计，最大限度地节约投资。
（2）选择国内外业已成熟可靠的工艺和技术，使矿山开采实施方便快捷，效益明显。
（3）优先选用国产节能设备，使企业能充分利用我国在推广国产化设备方面的优惠政策，提高企业的经济效益。
（4）按照业主对矿山建设的要求，充分利用现有工程，矿山外部总图运输设备及外部公路本次设计不再考虑。
（5）严格执行国内及矿产国颁布实施的矿产资源法、土地管理法、环境保护法、节约能源法以及矿山建设相关的规程、规范和上级主管部门的有关规定。
（6）贯彻执行我公司确定的质量方针，严格按质量体系文件的要求开展设计工作，精心设计，不断优化设计方案，确保设计方案技术先进、安全可靠、建设周期短、投资省、见效快、成本低、经济效益显著。
1.3.2 企业专业化协作和装备水平的基本原则
根据设计委托方对今后办矿模式的设想，公司所属原料基地矿山均采用自办方式，在满足安全、可靠的前提下，项目的装备水平、自动控制水平达到国内同行业一般水平即可。企业专业化协作主要为外部运输，可由当地社会运输车辆解决。
（1）贯彻“生产安全，技术可靠，节省投资，提高效益”的设计指导方针；在保证经济效益的前提下，安全高效充分的回收矿产资源；
（2）统筹规划，合理实施，对项目的整体合理性予以充分重视；
（3）贯彻执行国家和地区对环保、劳动安全、工业卫生、计量、消防等方面的有关现行规定和标准，做到“三同时”。
Feasibility Study on the Exploitation of Mongon-Ondor Silver-polymetallic Deposit
1 General Information
1.1 Overview
Mongon-Ondor silver-polymetallic deposit is located in Mongon-Ondor area in Nandelage (pinyin) County, Khentii province, Mongolia, with the center of mining area at Ondor Tsagaan, as shown in Chart 1-1 and Table 1-1.
Chart 1-1 Index Map of Mining Area
The special mining license in mining area (License No.10278A) has been obtained on January 29, 2007. The mineral right registration commenced on August 11, 2005 and is valid for 30 years, with registered area of about 1.73km2. The geographical coordinates are as follows:
East longitude North latitude
1. 110°10′30″ 47°52′00″
2. 110°12′00″ 47°52′00″
3. 110°12′00″ 47°51′30″
4. 110°10′30″ 47°51′30″
Table 1-1 Distances from the Mining Area to Settlements and Industrial Facilities
No. Settlements Direction Distance (km)
1 Ulaanbaatar West 330
2 Öndörkhaan Southeast 80
3 Emunedeleger County (pinyin) West 30
4 Bekh Mine Northeast 90
5 Bagam Ullr Coal Mine West 220
6 Boll Ondor Mining United Company (pinyin) South 270
1.2 References
(1) Consignment Contract of Design
(2) Verification Report for Solid Mineral Reserve of Mongon-Ondor Silver-polymetallic Deposit
(3) Regulation of Feasibility Research Report Formulation for Industrial Project of Non-ferrous Metal [Trial] (Zhong Se Xie Chan Zi [2001] No. 208)
(4) Explosion Security Regulations (GB6722-2003)
(5) Security Regulations for Metal / Non Metal Mines (GB16423-2006)
(6) Design Criterions for Non-ferrous Metal Mining [Trial] (YSJ019-92).
1.3 Basic Design Principles
1.3.1 Main guidelines, policies and principles in design
(1) Take natural and geographical environment which mining area locates in and characteristics of ore body into full consideration with elaborated planning and optimized design to save the investment to the utmost extent.
(2) To adopt consummate and reliable techniques which make mining to be carried out in convenient and fast way, accordingly remarkable benefit will be gained.
(3) Domestic energy-saving equipment is given priority in enterprise. With fully facilitation of favorable policies of our country, the enterprise profit will be improved.
(4) According to owner’s demands for mine construction, existing projects will be fully utilized in this design regardless of external general plan transportation equipment and external roads.
(5) Strictly implement mineral resources law, law of land administration, environmental protection law; energy conservation law, regulations of mine construction in our country and other countries of dominant mine productivity, and relevant regulations from supervisor departments.
(6) Keep in line with quality guideline of our company, all works should be carried out according to quality system files. This elaborated design and continuous optimizing project aim to make sure that the design plan is advanced, reliable with short term construction, low investment and cost, faster result and quick economic benefit.
1.3.2 Basic principles of enterprise specialization and cooperation, and equipment level
According to consigner’s blueprint of future mining mode, mines in company-owned raw material base are self-running mode. In the premises of safety and reliability, it is acceptable that the equipment and automatic control just achieve domestic average level in the fellow trade. Enterprise specialization and cooperation mainly refers to external transportation by local transporting vehicles.
(1) “Safe production, reliable technology, economizing investment, improving benefit” is the design guideline that we adhere to. The mine resource will be recycled safely and sufficiently in high efficiency under the precondition that economic benefit is guaranteed.
(2)Plan the whole project in overall view and implement it reasonably. Attention should be paid to the integrity and rationality of the project.
(3)Relevant regulations and standards on environmental protection, working security, industrial hygiene, and fire protection must be executed thoroughly. “Three simultaneous” system should be met (i.e. environmental protection measures should be designed, constructed and implemented simultaneously along with the construction projects).
2012.4.19