天花板施工手册翻译-中英对照
总则
这部分内容涵盖了吸声天花板和百叶式网格顶棚的施工要求，包括支撑物和附件。
百叶式网格顶棚只用于业主要求的控制室区域和其它区域.
外用三通悬挂式防潮吸声天花板可使用在在如洗手间和浴室的高潮湿水分区域。
外用三通悬挂式吸声天花板使用可使用在其它区域(例如办公室，厨房，餐厅等等)。
材料
百叶式网格顶棚
百叶式网格顶棚必须为漆饰面铝制材料，必须为方形或长方形并带有活动芯子。
外用三通悬挂式防潮吸声天花板
下列类型和面板铺设，安装在工厂外露式铝悬挂百叶式系统。
悬挂系统：外用三通，直接悬挂。
瓷砖：陶器吸声面板铺设，60厘米x 60厘米x 1.58厘米石灰华设计，可清洗表面框边白色抛光。
外用三通悬挂式吸声天花板。
单位铺设为下列类型，安装在涂装的金属网格悬挂系统上。
悬挂系统：
外用三通，直接悬挂，带有连锁横杆和全部要求的附件。
外用三通，弹簧锁，直接悬挂，带有连锁的梁横杆和全部需要附件。
瓷砖
阻燃矿物质纤维，60厘米x 60厘米x 1.90厘米，阴影线面板，水文模式，非直线铝箔背面。
阻燃矿物质纤维，60厘米x 60厘米x 1.90厘米，窗框边缘，质地音调图案，非直线铝箔背面。
吊架锚具
副钢架：连续吊架可支持副钢架结构，吸声天花板距离中心1.20米，和支撑件结构焊接。
混凝土的吊架锚具不允许装备有套筒式或自钻式锚固装置。
拉筋
软土的蒙纳尔合金或者18-8不锈钢，1.587毫米；
吊架
所有吊架必须进行电镀，吸声陶瓷天花板的退火电镀电线吊架的最小尺寸为2.778毫米。每个位置的吊架尺寸必须根据悬挂天花板的重量和吊架的间隔确定。按照施工要求，为每个角落灯具提供额外吊架，常规电力系统吊架之外每1.20米处至少有二处吊架。
施工总则
所有吸声天花板的安装施工必须符合ANSI 适用的标准说明，并符合其中指定的要求。
天花板百叶栏和固定系统的设计和安装必须留有出入口方便维护。
悬挂系统
吸声类型天花板的铺设不得对周边造成影响，要求墙体的横切面能够自由移动。
吊架
吊架必须有充裕的长度并且和顶部结构的连接方式为：天花板支持牢固，因此它必须不得下跌或者有向下的负荷或者向上的压力。附属装置的承力部位必须施加到每个吊架上。
All supply piping for water shall be hot-dip galvanized butt-welded steel pipe with threaded fittings.
INSTALLATION
All plumbing fixtures and accessories shall be installed in strict accordance with manufacturer's printed instructions.
After installation is completed, the Bidder shall thoroughly clean all plumbing fixtures and accessories. Surface of ail fixtures and accessories shall be free of stains, markings, scratches and debris.
INSPECTION AND TESTING
The Bidder shall test all drainage systems and plumbing fixtures and accessories after installation to ensure the proper operation as follows:
a. Water Supply Pipes
A hydrostatic test of water supply pipes shall be carried out prior to coating and prior to shielding and backfilling, or after completion of piping. The minimum pressure retention time shall be 30 minutes.
The test pressure of piping below elevated water tanks shall be twice the pressure equivalent to the static head.
b. Drainage Pipes
The water-filling test of the drainage pipes shall be carried out prior to coating and prior to shielding and backfilling, or after completion of piping.
The water passage test of sanitary drainpipes shall be carried out after sanitary wares, etc. have been attached.
The minimum water retention time in case of water filling test shall be 30 minutes or more and that in case of the water passage test shall be 15 minutes or more.
Any adjustments or repairs needed, shall be made by Bidder at his own expense and shall be completed to the satisfaction of the Owner.
0310340
Revision 0 Part 4.4-312 PLTU Adipala (PLTU 2 Jawa Tengah)
1 x (600-700 MW) Location Cilacap
BOOK III
PART 4.4. Civil Works 4.4.3 Technical Specification
Table 4.4.3.24-1 Plumbing Fixtures
Manufacturers / Model Numbe rs
Lavatory
Supply & Drain Fitting
Supply pipe
P-Trap Mirrors
Towel Rail
Water Closet Water Closet
Flush Valve
Paper Holder
One piece white vitreous china lavatory
Combination fitting with aerator and pop up drain
9 mm wall supply, loose key stop, escutcheon, reducing coupling, chromium plated
31 mm adjustable P -Trap,
One over each lavatory Mirrors for lavatories and wash-fountains. Stainless steel angle frame, satin finish with concealed and theft proof locking device (size as required)
One at each lavatory, stainless steel rod and fitting
Indonesia Style
Floor mounted, siphon jet action, white vitreous china, elongated bowl, 37 mm top spud, 2 bolt caps
Chromium plated, with vacuum breaker, 2,5 cm screw driver angle stop and quiet flush collections
One each water closet, forged brass chromium plated, metal roller
TOTO Indonesia
L511 V3
TGL511 -MPAN STANDARD
TCP TS 119 ASS
TS113W
C97V/A - 97 KL & TV 150NWV12
C72/3/710BRTL
STANDARD
S-20
0310341
Revision 0
Part 4.4 - 313 PLTU Adipala (PLTU 2 Jawa Tengah)
1 x (600-700 MW) Location Cilacap
武汉翻译公司
2013.5.18